cenrifuges for fluid cleaning, oil / sludge extraction, chip wringing, washing and galvanizers
cenrifuges for fluid cleaning, oil / sludge extraction, chip wringing, washing and galvanizerscenrifuges for fluid cleaning, oil / sludge extraction, chip wringing, washing and galvanizerscenrifuges for fluid cleaning, oil / sludge extraction, chip wringing, washing and galvanizerscenrifuges for fluid cleaning, oil / sludge extraction, chip wringing, washing and galvanizers

Process and Applications

Equipment
Fluid Cleaning (F) fluid cleaning
Clarifuge
225 & 236

 Removes suspended solids from liquid
 w Grinding coolants
 
w Cutting oils
 
w Quench oils
 
w Vibratory finishing waste water
 
w Lens grinding coolant
 
w Deep hole drilling coolants
 
w Wire drawing lubricants

Oil Extraction / Chip Wringing (E) oil / sludge extraction, chip wringing, washing / drying
Chip Wringer
301 & 601


or

oil / sludge extraction, chip wringing, washing / drying
Fluid Extractor
401, 402, 1101
& 1100

 Separates industrial fluids from solids
 w Cutting oil from metal chips and turnings
 
w Water soluble coolant from chips or turnings
 
w Oil or coolant from parts
 
w Oil or coolant from stampings

Chip Washing (CW)

 Degrease and clean parts + Oil Extractor
 pan and cover

 Chips are washed with hot detergent to
 remove oil and dried prior to the remelt operation
.

Washing / Drying (WD)

 Degrease and clean parts
 w Screw machine parts
 w Cold headed parts
 
w Fasteners and fittings

Sludge Extraction(SES):

 Removes liquid from most sludge.
 w Honing Sludges
 
w Glass Grinding
 
w Most types of metal grinding
 
w Quench oil slag

Galvanizer (GA): galvanizer
Galvanizer

 Spins molten metals (zinc or tin) from
 industrial parts and leaves uniform
 rust-resistant coating.

Custom Centrifuge (CC): cenrifuges for fluid cleaning, oil / sludge extraction, chip wringing, washing and galvanizers
Custom
Systems
 

Remove Suspended Solids From Liquid with The Kine-Spin Clarifuge

 The Clarifuge is essentially a centrifugal
 "filter" which removes solid contaminants
 down to 5 micron size from a wide variety
 of fluids. Unlike other types of filtration, the
 clarifuge
uses no physical filtration
 mediums such as bags or cartridges, so
 there are no costly filters to dispose of or
 repurchase.

fluid cleaning

fluid cleaning
Download Clarifuge brochure
Machine Capacities
Previous
Unit
Number
New Unit
Number
Product
Name
Load
Weight
Capacity
Load
Liquid
Capacity
Max.
RPM
Max. Gs Wringer Basket
Size
225 Clarifuge 40 lbs 1 gal. 3,450 2,029 12" dia. x 5" dp.
236 Clarifuge 50 lbs 2 gal. 3,150 1,821 13" dia. x 6"dp.
Clarifuge - The Industry Standard
  • Centrifugal Particle separation with no bags or filters
  • Fluid flow through rate up to 15 gallons per minute
  • Minimum separable solid particle size 2 to 5 microns
  • Separated solids capacity – 1 gallon or 2 gallons
  • Removes abrasive & machining swarf & fine chips
  • Clarifies wire EDM, quench, & wire drawing fluids
  • Cleans fluid from process equipment sump sludge
  • Easy bowl cleaning by Clari-Clean cleaning unit
  • Compact, 30 inch long, 20 inch wide, 20 inch high
  • Rugged ball bearing spindle, simple reliable belt drive
How a centrifuge Cleans Fluid

A centrifuge is a mechanical device used to separate
substances of different densities.  It quickly separates
substances that would normally slowly separate under
the influence of gravity.
  Refer to the diagram to the
right.  Dirty fluid is fed into a rotating bowl.  As the
fluid makes its way up and out of the bowl, centrifugal
force throws the solid contaminates (that are denser
than the fluid) to the outer perimeter of the bowel
where, over time, they compact and build a sludge
wall (A).   The liquid overflows the bowl and gravity
drains from the centrifuge (B).  Accumulated solids
are easily cleaned from the bowl by simply removing
the bowl and scooping out the sludge.

fluid cleaning
Machine Accessories Include:

Clarifuge Bowls Clari-Clean Bowl Cleaning Unit Portable Fluid Recovery Unit
Kine-Spin / Barrett Division of Kinefac® Corporation · Phone: (508) 754-6891 or (800) 228-6442 · Fax: (508) 756-5342 ·
Email us at:
kinespin@kinefac.com 
For more information on the Kinefac Group of quality products and services, please visit us a
t:
www.kinefac.com